Change the shingles on an older roof [Gillum, Illinois]
Wiki Article
It might surprise you to know that an old roof can be replaced by itself. While the project will require work and time, as well as some planning, we'll be there to help you.
Project Overview
For this project you'll need a hammer with a screwdriver, a prybar, roofing felt paper and roofing cement. A caulk gun, wire brush, a putty knives, and a wire brush. A helper is essential for this project to run smoothly. Now let's get started!
Step 1: Remove any broken shingles.
You can remove damaged shingles using a screwdriver or hammer. The good shingles should be protected around the edges. After the broken shingles have been removed, clean the area with a wire brush.
Step 2: Cut a new shingle to the right size.
Grab one of your new shingles, and use a utility knife to cut it to the right size. The new shingle should be exactly the same size as your original one.
Step 3: Attach the new shingle.
Now is the best time to replace the roof's shingles. Then, attach the new piece using 4 nails at each corner. You should space the nails evenly so they all go in the same place.
Step 4 - Repeat steps 1 through 3 until all shingles are replaced.
After you have replaced all the missing or damaged shingles it is time for some roof maintenance. This includes checking for nails that are missing, cleaning out gutters, and cutting down any branches or trees hanging above your roof.
Congratulations! By doing these things, you were able to replace the old roof shingles that (blog) were broken or missing. You should also make sure you do maintenance such as checking for nails roof contractor Cove3ll that are missing or cleaning gutters to ensure your roof lasts roof contractor Ellsworth many years.